An unquoted service path vulnerability in the 12d Synergy Server and File Replication Server components may allow an attacker to gain elevated privileges via the 12d Synergy Server and/or 12d Synergy File Replication Server executable service path. This is fixed in 4.3.10.192, 5.1.5.221, and 5.1.6.235.
When ssl was enabled for Mongo Hook, default settings included “allow_insecure” which caused that certificates were not validated. This was unexpected and undocumented. Users are recommended to upgrade to version 4.0.0, which fixes this issue.
Unrestricted Upload of File with Dangerous Type vulnerability in Apache Answer.This issue affects Apache Answer: through 1.2.1. Pixel Flood Attack by uploading large pixel files will cause server out of memory. A logged-in user can cause such an attack by uploading an image when posting content. Users are recommended to upgrade to version [1.2.5], which fixes the issue.
Improper Neutralization of Input During Web Page Generation (‘Cross-site Scripting’) vulnerability in Apache Answer.This issue affects Apache Answer: through 1.2.1. XSS attack when user enters summary. A logged-in user, when modifying their own submitted question, can input malicious code in the summary to create such an attack. Users are recommended to upgrade to version [1.2.5], which fixes the issue.
Concurrent Execution using Shared Resource with Improper Synchronization (‘Race Condition’) vulnerability in Apache Answer.This issue affects Apache Answer: through 1.2.1. Repeated submission during registration resulted in the registration of the same user. When users register, if they rapidly submit multiple registrations using scripts, it can result in the creation of multiple user accounts simultaneously with the same name. Users are recommended to upgrade to version [1.2.5], which fixes the issue.
Deserialization of Untrusted Data vulnerability in Apache Camel SQL ComponentThis issue affects Apache Camel: from 3.0.0 before 3.21.4, from 3.22.0 before 3.22.1, from 4.0.0 before 4.0.4, from 4.1.0 before 4.4.0. Users are recommended to upgrade to version 4.4.0, which fixes the issue. If users are on the 4.0.x LTS releases stream, then they are suggested to upgrade to 4.0.4. If users are on 3.x, they are suggested to move to 3.21.4 or 3.22.1
Deserialization of Untrusted Data vulnerability in Apache Camel CassandraQL Component AggregationRepository which is vulnerable to unsafe deserialization. Under specific conditions it is possible to deserialize malicious payload.This issue affects Apache Camel: from 3.0.0 before 3.21.4, from 3.22.0 before 3.22.1, from 4.0.0 before 4.0.4, from 4.1.0 before 4.4.0. Users are recommended to upgrade to version 4.4.0, which fixes the issue. If users are on the 4.0.x LTS releases stream, then they are suggested to upgrade to 4.0.4. If users are on 3.x, they are suggested to move to 3.21.4 or 3.22.1
Exposure of Remote Code Execution in Apache Dolphinscheduler. This issue affects Apache DolphinScheduler: before 3.2.1. We recommend users to upgrade Apache DolphinScheduler to version 3.2.1, which fixes the issue.
Because the HttpUtils class did not verify certificates, an attacker that could perform a Man-in-the-Middle (MITM) attack on outgoing https connections could impersonate the server. This issue affects Apache DolphinScheduler: before 3.2.0. Users are recommended to upgrade to version 3.2.1, which fixes the issue.
Session Fixation Apache DolphinScheduler before version 3.2.0, which session is still valid after the password change. Users are recommended to upgrade to version 3.2.1, which fixes this issue.
Arbitrary File Read Vulnerability in Apache Dolphinscheduler. This issue affects Apache DolphinScheduler: before 3.2.1. We recommend users to upgrade Apache DolphinScheduler to version 3.2.1, which fixes the issue.
Improper Input Validation vulnerability in Apache DolphinScheduler. An authenticated user can cause arbitrary, unsandboxed javascript to be executed on the server. This issue is a legacy of CVE-2023-49299. We didn’t fix it completely in CVE-2023-49299, and we added one more patch to fix it. This issue affects Apache DolphinScheduler: until 3.2.1. Users are recommended to upgrade to version 3.2.1, which fixes the issue.
The issue was resolved by sanitizing logging This issue is fixed in watchOS 10.1, macOS Sonoma 14.1, tvOS 17.1, macOS Monterey 12.7.1, iOS 16.7.2 and iPadOS 16.7.2, iOS 17.1 and iPadOS 17.1, macOS Ventura 13.6.1. An app may be able to access user-sensitive data.
An inconsistent user interface issue was addressed with improved state management. This issue is fixed in iOS 16.7.2 and iPadOS 16.7.2, iOS 17.1 and iPadOS 17.1, Safari 17.1, macOS Sonoma 14.1. Visiting a malicious website may lead to address bar spoofing.
The issue was addressed with improved bounds checks. This issue is fixed in watchOS 10.1, macOS Sonoma 14.1, tvOS 17.1, iOS 16.7.2 and iPadOS 16.7.2, iOS 17.1 and iPadOS 17.1, macOS Ventura 13.6.1. Processing a maliciously crafted image may lead to heap corruption.
This issue was addressed with improved state management. This issue is fixed in iOS 17.1 and iPadOS 17.1. An attacker with physical access may be able to silently persist an Apple ID on an erased device.
The issue was addressed with improved bounds checks. This issue is fixed in macOS Sonoma 14.1, tvOS 17.1, macOS Monterey 12.7.1, iOS 16.7.2 and iPadOS 16.7.2, iOS 17.1 and iPadOS 17.1, macOS Ventura 13.6.1. An app may be able to execute arbitrary code with kernel privileges.
A logic issue was addressed with improved checks. This issue is fixed in iOS 17.1 and iPadOS 17.1. A user’s private browsing activity may be unexpectedly saved in the App Privacy Report.
This issue was addressed with improved handling of symlinks. This issue is fixed in watchOS 10.1, macOS Sonoma 14.1, tvOS 17.1, iOS 16.7.2 and iPadOS 16.7.2, iOS 17.1 and iPadOS 17.1, macOS Ventura 13.6.1. A malicious app may be able to gain root privileges.
The issue was addressed with improved handling of caches. This issue is fixed in iOS 17.1 and iPadOS 17.1. A user may be unable to delete browsing history items.
A privacy issue was addressed with improved handling of files. This issue is fixed in watchOS 10.1, macOS Sonoma 14.1, macOS Monterey 12.7.2, macOS Ventura 13.6.3, iOS 17.1 and iPadOS 17.1. An app may be able to access sensitive user data.
A logic issue was addressed with improved checks. This issue is fixed in iOS 17.1 and iPadOS 17.1, macOS Ventura 13.6.3, macOS Sonoma 14.1, macOS Monterey 12.7.2. An attacker may be able to access connected network volumes mounted in the home directory.
An access issue was addressed with improvements to the sandbox. This issue is fixed in macOS Ventura 13.6.3, macOS Sonoma 14.1, macOS Monterey 12.7.2. An app may be able to execute arbitrary code out of its sandbox or with certain elevated privileges.
The issue was addressed with improved checks. This issue is fixed in macOS Sonoma 14.1, macOS Monterey 12.7.1, macOS Ventura 13.6.1. An app may be able to access user-sensitive data.
A logic issue was addressed with improved checks. This issue is fixed in macOS Sonoma 14.1, macOS Monterey 12.7.1, macOS Ventura 13.6.1. An app may be able to access user-sensitive data.
The issue was addressed with improved checks. This issue is fixed in macOS Sonoma 14.1, macOS Monterey 12.7.1, macOS Ventura 13.6.1. An app may be able to access user-sensitive data.
The issue was addressed with improved checks. This issue is fixed in macOS Sonoma 14.1, macOS Monterey 12.7.1, macOS Ventura 13.6.1. An app may be able to modify protected parts of the file system.
A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Sonoma 14.1, macOS Monterey 12.7.1, macOS Ventura 13.6.1. An app may be able to modify protected parts of the file system.
The issue was addressed with improved checks. This issue is fixed in macOS Sonoma 14.1, macOS Monterey 12.7.1, macOS Ventura 13.6.1. An app may be able to modify protected parts of the file system.
A privacy issue was addressed with improved private data redaction for log entries. This issue is fixed in watchOS 10.1, macOS Sonoma 14.1, iOS 17.1 and iPadOS 17.1. An app may be able to access sensitive user data.
The issue was addressed with improved checks. This issue is fixed in macOS Sonoma 14.1, macOS Monterey 12.7.1, macOS Ventura 13.6.1. An app may be able to bypass certain Privacy preferences.
A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Sonoma 14.1. An app may gain unauthorized access to Bluetooth.
The issue was addressed with improved checks. This issue is fixed in iOS 17.1 and iPadOS 17.1, macOS Ventura 13.6.3, macOS Sonoma 14.1, macOS Monterey 12.7.1. An app with root privileges may be able to access private information.
This issue was addressed with improved state management. This issue is fixed in tvOS 17.1, watchOS 10.1, macOS Sonoma 14.1, iOS 17.1 and iPadOS 17.1. An app may be able to access sensitive user data.
This issue was addressed with improved redaction of sensitive information. This issue is fixed in tvOS 17.1, watchOS 10.1, macOS Sonoma 14.1, iOS 17.1 and iPadOS 17.1. An app may be able to leak sensitive user information.
A permissions issue was addressed with additional restrictions. This issue is fixed in tvOS 17.1, watchOS 10.1, macOS Sonoma 14.1, iOS 17.1 and iPadOS 17.1. An app may be able to access sensitive user data.
The ACME-challenge endpoint in Appwrite 0.5.0 through 0.12.x before 0.12.2 allows remote attackers to read arbitrary local files via ../ directory traversal. In order to be vulnerable, APP_STORAGE_CERTIFICATES/.well-known/acme-challenge must exist on disk. (This pathname is automatically created if the user chooses to install Let’s Encrypt certificates via Appwrite.)
Trusted Firmware-A (TF-A) before 2.10 has a potential read out-of-bounds in the SDEI service. The input parameter passed in register x1 is not validated well enough in the function sdei_interrupt_bind. The parameter is passed to a call to plat_ic_get_interrupt_type. It can be any arbitrary value passing checks in the function plat_ic_is_sgi. A compromised Normal World (Linux kernel) can enable a root-privileged attacker to issue arbitrary SMC calls. Using this primitive, he can control the content of registers x0 through x6, which are used to send parameters to TF-A. Out-of-bounds addresses can be read in the context of TF-A (EL3). Because the read value is never returned to non-secure memory or in registers, no leak is possible. An attacker can still crash TF-A, however.
This High severity Injection vulnerability was introduced in Assets Discovery 1.0 – 6.2.0 (all versions). Assets Discovery, which can be downloaded via Atlassian Marketplace, is a network scanning tool that can be used with or without an agent with Jira Service Management Cloud, Data Center or Server. It detects hardware and software that is connected to your local network and extracts detailed information about each asset. This data can then be imported into Assets in Jira Service Management to help you manage all of the devices and configuration items within your local network. This Injection vulnerability, with a CVSS Score of 7.2, allows an authenticated attacker to modify the actions taken by a system call which has high impact to confidentiality, high impact to integrity, high impact to availability, and requires no user interaction. Atlassian recommends that Assets Discovery customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions See the release notes (https://confluence.atlassian.com/assetapps/assets-discovery-3-2-1-cloud-6-2-1-data_center-1333987182.html). You can download the latest version of Assets Discovery from the Atlassian Marketplace (https://marketplace.atlassian.com/apps/1214668/assets-discovery?hosting=datacenter&tab=installation). This vulnerability was reported via our Penetration Testing program.
This High severity Stored XSS vulnerability was introduced in version 2.7.0 of Confluence Data Center. This Stored XSS vulnerability, with a CVSS Score of 8.5, allows an authenticated attacker to execute arbitrary HTML or JavaScript code on a victims browser which has high impact to confidentiality, low impact to integrity, no impact to availability, and requires no user interaction. Data Center Atlassian recommends that Confluence Data Center customers upgrade to the latest version. If you are unable to do so, upgrade your instance to one of the specified supported fixed versions: ||Affected versions||Fixed versions|| |from 8.7.0 to 8.7.1|8.8.0 recommended or 8.7.2| |from 8.6.0 to 8.6.1|8.8.0 recommended| |from 8.5.0 to 8.5.4 LTS|8.8.0 recommended or 8.5.5 LTS or 8.5.6 LTS| |from 8.4.0 to 8.4.5|8.8.0 recommended or 8.5.6 LTS| |from 8.3.0 to 8.3.4|8.8.0 recommended or 8.5.6 LTS| |from 8.2.0 to 8.2.3|8.8.0 recommended or 8.5.6 LTS| |from 8.1.0 to 8.1.4|8.8.0 recommended or 8.5.6 LTS| |from 8.0.0 to 8.0.4|8.8.0 recommended or 8.5.6 LTS| |from 7.20.0 to 7.20.3|8.8.0 recommended or 8.5.6 LTS| |from 7.19.0 to 7.19.17 LTS|8.8.0 recommended or 8.5.6 LTS or 7.19.18 LTS or 7.19.19 LTS| |from 7.18.0 to 7.18.3|8.8.0 recommended or 8.5.6 LTS or 7.19.19 LTS| |from 7.17.0 to 7.17.5|8.8.0 recommended or 8.5.6 LTS or 7.19.19 LTS| |Any earlier versions|8.8.0 recommended or 8.5.6 LTS or 7.19.19 LTS| Server Atlassian recommends that Confluence Server customers upgrade to the latest 8.5.x LTS version. If you are unable to do so, upgrade your instance to one of the specified supported fixed versions: Â ||Affected versions||Fixed versions|| |from 8.5.0 to 8.5.4 LTS|8.5.5 LTS or 8.5.6 LTS recommended| |from 8.4.0 to 8.4.5|8.5.6 LTS recommended| |from 8.3.0 to 8.3.4|8.5.6 LTS recommended| |from 8.2.0 to 8.2.3|8.5.6 LTS recommended| |from 8.1.0 to 8.1.4|8.5.6 LTS recommended| |from 8.0.0 to 8.0.4|8.5.6 LTS recommended| |from 7.20.0 to 7.20.3|8.5.6 LTS recommended| |from 7.19.0 to 7.19.17 LTS|8.5.6 LTS recommended or 7.19.18 LTS or 7.19.19 LTS| |from 7.18.0 to 7.18.3|8.5.6 LTS recommended or 7.19.19 LTS| |from 7.17.0 to 7.17.5|8.5.6 LTS recommended or 7.19.19 LTS| |Any earlier versions|8.5.6 LTS recommended or 7.19.19 LTS| See the release notes ([https://confluence.atlassian.com/doc/confluence-release-notes-327.html]). You can download the latest version of Confluence Data Center from the download center ([https://www.atlassian.com/software/confluence/download-archives]). This vulnerability was reported via our Bug Bounty program.
A maliciously crafted STP, CATPART or MODEL file when parsed in ASMKERN228A.dll through Autodesk AutoCAD can force an Out-of-Bound Write. A malicious actor can leverage this vulnerability to cause a crash, write sensitive data, or execute arbitrary code in the context of the current process.
A maliciously crafted STP file when parsed in ASMIMPORT228A.dll through Autodesk AutoCAD can force an Out-of-Bound Write. A malicious actor can leverage this vulnerability to cause a crash, write sensitive data, or execute arbitrary code in the context of the current process.
A maliciously crafted MODEL file when parsed in libodxdll.dll through Autodesk AutoCAD can force an Out-of-Bound Write. A malicious actor can leverage this vulnerability to cause a crash, write sensitive data, or execute arbitrary code in the context of the current process.
A maliciously crafted 3DM file when parsed in opennurbs.dll through Autodesk AutoCAD can force an Out-of-Bound Write. A malicious actor can leverage this vulnerability to cause a crash, write sensitive data, or execute arbitrary code in the context of the current process.
A maliciously crafted CATPART file when parsed in CC5Dll.dll and ASMBASE228A.dll through Autodesk AutoCAD can force an Out-of-Bound Write. A malicious actor can leverage this vulnerability to cause a crash, write sensitive data, or execute arbitrary code in the context of the current process.
A maliciously crafted STP file when parsed in ASMIMPORT228A.dll through Autodesk AutoCAD can force an Out-of-Bound Write. A malicious actor can leverage this vulnerability to cause a crash, write sensitive data, or execute arbitrary code in the context of the current process.
A maliciously crafted SLDPRT file when parsed ODXSW_DLL.dll through Autodesk AutoCAD can be used to cause a Stack-based Overflow. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.
A maliciously crafted CATPART file when parsed CC5Dll.dll through Autodesk AutoCAD can be used to cause a Stack-based Overflow. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.
A maliciously crafted MODEL, SLDPRT or SLDASM file when parsed VCRUNTIME140.dll through Autodesk AutoCAD can be used to cause a Heap-based Overflow. A malicious actor can leverage this vulnerability to cause a crash, read sensitive data, or execute arbitrary code in the context of the current process.
A maliciously crafted MODEL file in libodxdll.dll when parsed through Autodesk AutoCAD could lead to a memory corruption vulnerability by write access violation. This vulnerability in conjunction with other vulnerabilities could lead to code execution in the context of the current process.
A maliciously crafted MODEL 3DM, STP or SLDASM files in opennurbs.dll when parsed through Autodesk AutoCAD could lead to a memory corruption vulnerability by write access violation. This vulnerability in conjunction with other vulnerabilities could lead to code execution in the context of the current process.
A maliciously crafted SLDASM, or SLDPRT files in ODXSW_DLL.dll when parsed through Autodesk AutoCAD could lead to a memory corruption vulnerability by write access violation. This vulnerability in conjunction with other vulnerabilities could lead to code execution in the context of the current process.
A maliciously crafted STP file in ASMKERN228A.dll or ASMDATAX228A.dll when parsed through Autodesk AutoCAD could lead to a memory corruption vulnerability by write access violation. This vulnerability in conjunction with other vulnerabilities could lead to code execution in the context of the current process.
A maliciously crafted STP file in atf_dwg_consumer.dll when parsed through Autodesk AutoCAD could lead to a memory corruption vulnerability by write access violation. This vulnerability in conjunction with other vulnerabilities could lead to code execution in the context of the current process.
A maliciously crafted STP file in ASMDATAX228A.dll when parsed through Autodesk AutoCAD could lead to a memory corruption vulnerability by write access violation. This vulnerability in conjunction with other vulnerabilities could lead to code execution in the context of the current process.
A maliciously crafted IGS file when tbb.dll parsed through Autodesk AutoCAD can be used in user-after-free vulnerability. This vulnerability, along with other vulnerabilities, could lead to code execution in the current process.
A maliciously crafted SLDPRT file when ASMkern228A.dll parsed through Autodesk AutoCAD can be used in user-after-free vulnerability. This vulnerability, along with other vulnerabilities, could lead to code execution in the current process.
A maliciously crafted STP file when ASMKERN228A.dll parsed through Autodesk AutoCAD can be used to dereference an untrusted pointer. This vulnerability, along with other vulnerabilities, could lead to code execution in the current process.
A maliciously crafted STP or SLDPRT file when ODXSW_DLL.dll parsed through Autodesk AutoCAD can be used to uninitialized variable. This vulnerability, along with other vulnerabilities, could lead to code execution in the current process.
Cross Site Scripting (XSS) vulnerability in Bludit CMS version 3.15, allows remote attackers to execute arbitrary code and obtain sensitive information via edit-content.php.
An issue in He3 App for macOS version 2.0.17, allows remote attackers to execute arbitrary code via the RunAsNode and enableNodeClilnspectArguments settings.
A remote code execution (RCE) vulnerability in /admin/define_language.php of CE Phoenix v1.0.8.20 allows attackers to execute arbitrary PHP code via injecting a crafted payload into the file english.php.
A reflected cross-site scripting (XSS) vulnerability in ChurchCRM 5.5.0 allows remote attackers to inject arbitrary web script or HTML via the type parameter of /EventAttendance.php
A XSS vulnerability was found in the ChurchCRM v.5.5.0 functionality, edit your event, where malicious JS or HTML code can be inserted in the Event Sermon field in EventEditor.php.
SQL Injection vulnerability in CRMEB crmeb_java v.1.3.4 and before allows a remote attacker to obtain sensitive information via the latitude and longitude parameters in the api/front/store/list component.
An arbitrary file upload vulnerability in /admin/upgrade of CSZ CMS v1.3.0 allows attackers to execute arbitrary code via uploading a crafted Zip file.
Command Injection vulnerability in D-Link Dir 816 with firmware version DIR-816_A2_v1.10CNB04 allows attackers to run arbitrary commands via the urlAdd parameter.
Command Injection vulnerability in D-Link Dir 882 with firmware version DIR882A1_FW130B06 allows attackers to run arbitrary commands via crafted POST request to /HNAP1/.
DOM-based HTML injection vulnerability in the main page of Darktrace Threat Visualizer version 6.1.27 (bundle version 61050) and before has been identified. A URL, crafted by a remote attacker and visited by an authenticated user, allows open redirect and potential credential stealing using an injected HTML form.
A reflected Cross-Site Scripting (XSS) vulnerability in FUEL CMS 1.5.2allows attackers to run arbitrary code via crafted string after the group_id parameter.
Cross Site Scripting vulnerability in the sanitize function in Enhancesoft osTicket 1.18.0 allows a remote attacker to escalate privileges via a crafted support ticket.
Enhavo v0.13.1 was discovered to contain an HTML injection vulnerability in the Author text field under the Blockquote module. This vulnerability allows attackers to execute arbitrary code via a crafted payload.
A cross-site scripting (XSS) vulnerability in the New/Edit Article module of Enhavo CMS v0.13.1 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Create Tag text field.
A cross-site scripting (XSS) vulnerability in the Header module of Enhavo CMS v0.13.1 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Undertitle text field.
A cross-site scripting (XSS) vulnerability in the Header module of Enhavo CMS v0.13.1 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Title text field.
A XSLT Server Side injection vulnerability in the Import Jobs function of FireBear Improved Import And Export v3.8.6 allows attackers to execute arbitrary commands via a crafted XSLT file.
Flusity-CMS v2.33 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /cover/addons/info_media_gallery/action/edit_addon_post.php
A cross-site scripting (XSS) vulnerability in the Addon JD Flusity ‘Social block links’ module of flusity-CMS v2.33 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Profile Name text field.
A cross-site scripting (XSS) vulnerability in the Addon JD Simple module of flusity-CMS v2.33 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Title text field.
A cross-site scripting (XSS) vulnerability in the Addon JD Flusity ‘Media Gallery with description’ module of flusity-CMS v2.33 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Gallery name text field.
The Frentix GmbH OpenOlat LMS is affected by multiple stored Cross-Site Scripting (XSS) vulnerabilities. An attacker with rights to create or edit groups can create a course with a name that contains an XSS payload. Furthermore, attackers with the permissions to create or rename a catalog (sub-category) can enter unfiltered input in the name field. In addition, attackers who are allowed to create curriculums can also enter unfiltered input in the name field. This allows an attacker to execute stored JavaScript code with the permissions of the victim in the context of the user’s browser.
The Frentix GmbH OpenOlat LMS is affected by stored a Cross-Site Scripting (XSS) vulnerability. It is possible to upload files within the Media Center of OpenOlat version 18.1.5 (or lower) as an authenticated user without any other rights. Although the filetypes are limited, an SVG image containing an XSS payload can be uploaded. After a successful upload the file can be shared with groups of users (including admins) who can be attacked with the JavaScript payload.
plugins/gtk+/glade-gtk-box.c in GNOME Glade before 3.38.1 and 3.39.x before 3.40.0 mishandles widget rebuilding for GladeGtkBox, leading to a denial of service (application crash).
In DevmemIntUnmapPMR of devicemem_server.c, there is a possible arbitrary code execution due to a use after free. This could lead to local escalation of privilege in the kernel with no additional execution privileges needed. User interaction is not needed for exploitation.
In convertSubgraphFromHAL of ShimConverter.cpp, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.
In multiple files, there is a possible way that trimmed content could be included in PDF output due to a logic error in the code. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.
In applyCustomDescription of SaveUi.java, there is a possible way to view other user’s images due to a confused deputy. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.
In startInstall of UpdateFetcher.java, there is a possible way to trigger a malicious config update due to a logic error. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In convertToComponentName of DreamService.java, there is a possible way to launch arbitrary protected activities due to intent redirection. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.
In multiple locations, there is a possible out of bounds read due to a missing bounds check. This could lead to paired device information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.
In shouldUseNoOpLocation of CameraActivity.java, there is a possible confused deputy due to a permissions bypass. This could lead to local information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.
In convertYUV420Planar16ToY410 of ColorConverter.cpp, there is a possible out of bounds write due to a heap buffer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In setListening of AppOpsControllerImpl.java, there is a possible way to hide the microphone privacy indicator when restarting systemUI due to a missing check for active recordings. This could lead to local denial of service with no additional execution privileges needed. User interaction is needed for exploitation.
In onActivityResult of NotificationSoundPreference.java, there is a possible way to hear audio files belonging to a different user due to a confused deputy. This could lead to local information disclosure across users of a device with no additional execution privileges needed. User interaction is not needed for exploitation.
In onCreate of NotificationAccessConfirmationActivity.java, there is a possible way for an app in the work profile to enable notification listener services due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.
In ConvertRGBToPlanarYUV of Codec2BufferUtils.cpp, there is a possible out of bounds write due to an incorrect bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In multiple files, there is a possible way to capture the device screen when disallowed by device policy due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In btif_to_bta_response of btif_gatt_util.cc, there is a possible out of bounds read due to an incorrect bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.
In attp_build_read_by_type_value_cmd of att_protocol.cc , there is a possible out of bounds write due to improper input validation. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation.
In queryChildDocuments of FileSystemProvider.java, there is a possible way to request access to directories that should be hidden due to improper input validation. This could lead to local escalation of privilege with User execution privileges needed. User interaction is needed for exploitation.
In multiple functions of ashmem-dev.cpp, there is a possible missing seal due to a heap buffer overflow. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In BackgroundLaunchProcessController, there is a possible way to launch arbitrary activity from the background due to BAL Bypass. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In onNullBinding of TileLifecycleManager.java, there is a possible way to launch an activity from the background due to a missing null check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In startNextMatchingActivity of ActivityTaskManagerService.java, there is a possible way to bypass the restrictions on starting activities from the background due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In applyCustomDescription of SaveUi.java, there is a possible way to view images belonging to a different user due to a missing permission check. This could lead to local information disclosure with User execution privileges needed. User interaction is not needed for exploitation.
In injectInputEventToInputFilter of AccessibilityManagerService.java, there is a possible arbitrary input event injection due to a missing permission check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.
In setParameter of MtpPacket.cpp, there is a possible out of bounds read due to a heap buffer overflow. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.
In removePersistentDot of SystemStatusAnimationSchedulerImpl.kt, there is a possible race condition due to a logic error in the code. This could lead to local escalation of privilege that fails to remove the persistent dot with no additional execution privileges needed. User interaction is not needed for exploitation.
Out of bounds memory access in Blink in Google Chrome prior to 122.0.6261.57 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)
Use after free in Mojo in Google Chrome prior to 122.0.6261.57 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)
Inappropriate implementation in Site Isolation in Google Chrome prior to 122.0.6261.57 allowed a remote attacker to bypass content security policy via a crafted HTML page. (Chromium security severity: Medium)
Inappropriate implementation in Content Security Policy in Google Chrome prior to 122.0.6261.57 allowed a remote attacker to bypass content security policy via a crafted HTML page. (Chromium security severity: Medium)
Use after free in Accessibility in Google Chrome prior to 122.0.6261.57 allowed a remote attacker who had compromised the renderer process to potentially exploit heap corruption via specific UI gestures. (Chromium security severity: Medium)
Inappropriate implementation in Navigation in Google Chrome prior to 122.0.6261.57 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium)
Insufficient policy enforcement in Download in Google Chrome prior to 122.0.6261.57 allowed a remote attacker to bypass filesystem restrictions via a crafted HTML page. (Chromium security severity: Medium)
Inappropriate implementation in Navigation in Google Chrome prior to 122.0.6261.57 allowed a remote attacker to spoof security UI via a crafted HTML page. (Chromium security severity: Low)
In Hazelcast Platform through 5.3.4, a security issue exists within the SQL mapping for the CSV File Source connector. This issue arises from inadequate permission checking, which could enable unauthorized clients to access data from files stored on a member’s filesystem.
Hitron CODA-4582 and CODA-4589 devices have default PSKs that are generated from 5-digit hex values concatenated with a “Hitron” substring, resulting in insufficient entropy (only about one million possibilities).
Certain HP Enterprise LaserJet, and HP LaserJet Managed Printers are potentially vulnerable to information disclosure, when connections made by the device back to services enabled by some solutions may have been trusted without the appropriate CA certificate in the device’s certificate store.
Certain HP LaserJet Pro, HP Enterprise LaserJet, and HP LaserJet Managed Printers are potentially vulnerable to Remote Code Execution due to buffer overflow when rendering fonts embedded in a PDF file.
Vulnerability of serialization/deserialization mismatch in the vibration framework.Successful exploitation of this vulnerability may affect availability.
Vulnerability of missing authentication for critical functions in the Wi-Fi module.Successful exploitation of this vulnerability may affect service confidentiality.
Vulnerability of foreground service restrictions being bypassed in the NMS module.Successful exploitation of this vulnerability may affect service confidentiality.
Vulnerability of defects introduced in the design process in the Control Panel module.Successful exploitation of this vulnerability may cause app processes to be started by mistake.
Out-of-bounds read vulnerability in the smart activity recognition module.Successful exploitation of this vulnerability may cause features to perform abnormally.
Out-of-bounds read vulnerability in the smart activity recognition module.Successful exploitation of this vulnerability may cause features to perform abnormally.
Vulnerability of improper access control in the media library module.Successful exploitation of this vulnerability may affect service availability and integrity.
Vulnerability of permission verification in the content sharing pop-up module.Successful exploitation of this vulnerability may cause unauthorized file sharing.
Vulnerability of input data not being verified in the cellular data module.Successful exploitation of this vulnerability may cause out-of-bounds access.
Vulnerability of incorrect service logic in the WindowManagerServices module.Successful exploitation of this vulnerability may cause features to perform abnormally.
Script injection vulnerability in the email module.Successful exploitation of this vulnerability may affect service confidentiality, integrity, and availability.
In QUIC in RFC 9000, the Latency Spin Bit specification (section 17.4) does not strictly constrain the bit value when the feature is disabled, which might allow remote attackers to construct a covert channel with data represented as changes to the bit value. NOTE: The “Sheridan, S., Keane, A. (2015). In Proceedings of the 14th European Conference on Cyber Warfare and Security (ECCWS), University of Hertfordshire, Hatfield, UK.” paper says “Modern Internet communication protocols provide an almost infinite number of ways in which data can be hidden or embed whithin seemingly normal network traffic.”
The Access Point functionality in eapol_auth_key_handle in eapol.c in iNet wireless daemon (IWD) before 2.14 allows attackers to gain unauthorized access to a protected Wi-Fi network. An attacker can complete the EAPOL handshake by skipping Msg2/4 and instead sending Msg4/4 with an all-zero key.
The implementation of PEAP in wpa_supplicant through 2.10 allows authentication bypass. For a successful attack, wpa_supplicant must be configured to not verify the network’s TLS certificate during Phase 1 authentication, and an eap_peap_decrypt vulnerability can then be abused to skip Phase 2 authentication. The attack vector is sending an EAP-TLV Success packet instead of starting Phase 2. This allows an adversary to impersonate Enterprise Wi-Fi networks.
An HTML injection vulnerability in the Edit Content Layout module of Kirby CMS v4.1.0 allows attackers to execute arbitrary code via a crafted payload.
An arbitrary file upload vulnerability in the Profile Image module of Kirby CMS v4.1.0 allows attackers to execute arbitrary code via a crafted PDF file.
A stored cross-site scripting (XSS) vulnerability in the Edit Content Layout module of Kirby CMS v4.1.0 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Link field.
Liferay Portal 7.2.0 through 7.3.5, and older unsupported versions, and Liferay DXP 7.3 before fix pack 1, 7.2 before fix pack 17, and older unsupported versions does not obfuscate password reminder answers on the page, which allows attackers to use man-in-the-middle or shoulder surfing attacks to steal user’s password reminder answers.
Cross-Site Request Forgery (CSRF) vulnerability in the terms of use page in Liferay Portal before 7.3.6, and Liferay DXP 7.3 before service pack 1, 7.2 before fix pack 11 allows remote attackers to accept the site’s terms of use via social engineering and enticing the user to visit a malicious page.
Liferay Portal before 7.4.3.16 and Liferay DXP before 7.2 fix pack 19, 7.3 before update 6, and 7.4 before update 16 allow remote authenticated users to become the owner of a wiki page by editing the wiki page.
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction New elements in this transaction might expired before such transaction ends. Skip sync GC for such elements otherwise commit path might walk over an already released object. Once transaction is finished, async GC will collect such expired element.
In the Linux kernel, the following vulnerability has been resolved: f2fs: explicitly null-terminate the xattr list When setting an xattr, explicitly null-terminate the xattr list. This eliminates the fragile assumption that the unused xattr space is always zeroed.
In the Linux kernel, the following vulnerability has been resolved: binder: fix use-after-free in shinker’s callback The mmap read lock is used during the shrinker’s callback, which means that using alloc->vma pointer isn’t safe as it can race with munmap(). As of commit dd2283f2605e (“mm: mmap: zap pages with read mmap_sem in munmap”) the mmap lock is downgraded after the vma has been isolated. I was able to reproduce this issue by manually adding some delays and triggering page reclaiming through the shrinker’s debug sysfs. The following KASAN report confirms the UAF: ================================================================== BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8 Read of size 8 at addr ffff356ed50e50f0 by task bash/478 CPU: 1 PID: 478 Comm: bash Not tainted 6.6.0-rc5-00055-g1c8b86a3799f-dirty #70 Hardware name: linux,dummy-virt (DT) Call trace: zap_page_range_single+0x470/0x4b8 binder_alloc_free_page+0x608/0xadc __list_lru_walk_one+0x130/0x3b0 list_lru_walk_node+0xc4/0x22c binder_shrink_scan+0x108/0x1dc shrinker_debugfs_scan_write+0x2b4/0x500 full_proxy_write+0xd4/0x140 vfs_write+0x1ac/0x758 ksys_write+0xf0/0x1dc __arm64_sys_write+0x6c/0x9c Allocated by task 492: kmem_cache_alloc+0x130/0x368 vm_area_alloc+0x2c/0x190 mmap_region+0x258/0x18bc do_mmap+0x694/0xa60 vm_mmap_pgoff+0x170/0x29c ksys_mmap_pgoff+0x290/0x3a0 __arm64_sys_mmap+0xcc/0x144 Freed by task 491: kmem_cache_free+0x17c/0x3c8 vm_area_free_rcu_cb+0x74/0x98 rcu_core+0xa38/0x26d4 rcu_core_si+0x10/0x1c __do_softirq+0x2fc/0xd24 Last potentially related work creation: __call_rcu_common.constprop.0+0x6c/0xba0 call_rcu+0x10/0x1c vm_area_free+0x18/0x24 remove_vma+0xe4/0x118 do_vmi_align_munmap.isra.0+0x718/0xb5c do_vmi_munmap+0xdc/0x1fc __vm_munmap+0x10c/0x278 __arm64_sys_munmap+0x58/0x7c Fix this issue by performing instead a vma_lookup() which will fail to find the vma that was isolated before the mmap lock downgrade. Note that this option has better performance than upgrading to a mmap write lock which would increase contention. Plus, mmap_write_trylock() has been recently removed anyway.
In the Linux kernel, the following vulnerability has been resolved: uio: Fix use-after-free in uio_open core-1 core-2 ——————————————————- uio_unregister_device uio_open idev = idr_find() device_unregister(&idev->dev) put_device(&idev->dev) uio_device_release get_device(&idev->dev) kfree(idev) uio_free_minor(minor) uio_release put_device(&idev->dev) kfree(idev) ——————————————————- In the core-1 uio_unregister_device(), the device_unregister will kfree idev when the idev->dev kobject ref is 1. But after core-1 device_unregister, put_device and before doing kfree, the core-2 may get_device. Then: 1. After core-1 kfree idev, the core-2 will do use-after-free for idev. 2. When core-2 do uio_release and put_device, the idev will be double freed. To address this issue, we can get idev atomic & inc idev reference with minor_lock.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob() If authblob->SessionKey.Length is bigger than session key size(CIFS_KEY_SIZE), slub overflow can happen in key exchange codes. cifs_arc4_crypt copy to session key array from SessionKey from client.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out of bounds in init_smb2_rsp_hdr() If client send smb2 negotiate request and then send smb1 negotiate request, init_smb2_rsp_hdr is called for smb1 negotiate request since need_neg is set to false. This patch ignore smb1 packets after ->need_neg is set to false.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate session id and tree id in compound request `smb2_get_msg()` in smb2_get_ksmbd_tcon() and smb2_check_user_session() will always return the first request smb2 header in a compound request. if `SMB2_TREE_CONNECT_HE` is the first command in compound request, will return 0, i.e. The tree id check is skipped. This patch use ksmbd_req_buf_next() to get current command in compound.
In the Linux kernel, the following vulnerability has been resolved: apparmor: avoid crash when parsed profile name is empty When processing a packed profile in unpack_profile() described like “profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {…}” a string “:samba-dcerpcd” is unpacked as a fully-qualified name and then passed to aa_splitn_fqname(). aa_splitn_fqname() treats “:samba-dcerpcd” as only containing a namespace. Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later aa_alloc_profile() crashes as the new profile name is NULL now. general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty #16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:strlen+0x1e/0xa0 Call Trace: <TASK> ? strlen+0x1e/0xa0 aa_policy_init+0x1bb/0x230 aa_alloc_profile+0xb1/0x480 unpack_profile+0x3bc/0x4960 aa_unpack+0x309/0x15e0 aa_replace_profiles+0x213/0x33c0 policy_update+0x261/0x370 profile_replace+0x20e/0x2a0 vfs_write+0x2af/0xe00 ksys_write+0x126/0x250 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> —[ end trace 0000000000000000 ]— RIP: 0010:strlen+0x1e/0xa0 It seems such behaviour of aa_splitn_fqname() is expected and checked in other places where it is called (e.g. aa_remove_profiles). Well, there is an explicit comment “a ns name without a following profile is allowed” inside. AFAICS, nothing can prevent unpacked “name” to be in form like “:samba-dcerpcd” – it is passed from userspace. Deny the whole profile set replacement in such case and inform user with EPROTO and an explaining message. Found by Linux Verification Center (linuxtesting.org).
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid dirent corruption As Al reported in link[1]: f2fs_rename() … if (old_dir != new_dir && !whiteout) f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir); else f2fs_put_page(old_dir_page, 0); You want correct inumber in the “..” link. And cross-directory rename does move the source to new parent, even if you’d been asked to leave a whiteout in the old place. [1] https://lore.kernel.org/all/20231017055040.GN800259@ZenIV/ With below testcase, it may cause dirent corruption, due to it missed to call f2fs_set_link() to update “..” link to new directory. – mkdir -p dir/foo – renameat2 -w dir/foo bar [ASSERT] (__chk_dots_dentries:1421) –> Bad inode number[0x4] for ‘..’, parent parent ino is [0x3] [FSCK] other corrupted bugs [Fail]
In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix use after free on context disconnection Upon module load, a kthread is created targeting the pvr2_context_thread_func function, which may call pvr2_context_destroy and thus call kfree() on the context object. However, that might happen before the usb hub_event handler is able to notify the driver. This patch adds a sanity check before the invalid read reported by syzbot, within the context disconnection call stack.
In the Linux kernel, the following vulnerability has been resolved: bpf: Defer the free of inner map when necessary When updating or deleting an inner map in map array or map htab, the map may still be accessed by non-sleepable program or sleepable program. However bpf_map_fd_put_ptr() decreases the ref-counter of the inner map directly through bpf_map_put(), if the ref-counter is the last one (which is true for most cases), the inner map will be freed by ops->map_free() in a kworker. But for now, most .map_free() callbacks don’t use synchronize_rcu() or its variants to wait for the elapse of a RCU grace period, so after the invocation of ops->map_free completes, the bpf program which is accessing the inner map may incur use-after-free problem. Fix the free of inner map by invoking bpf_map_free_deferred() after both one RCU grace period and one tasks trace RCU grace period if the inner map has been removed from the outer map before. The deferment is accomplished by using call_rcu() or call_rcu_tasks_trace() when releasing the last ref-counter of bpf map. The newly-added rcu_head field in bpf_map shares the same storage space with work field to reduce the size of bpf_map.
In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump Syzkaller has reported a NULL pointer dereference when accessing rgd->rd_rgl in gfs2_rgrp_dump(). This can happen when creating rgd->rd_gl fails in read_rindex_entry(). Add a NULL pointer check in gfs2_rgrp_dump() to prevent that.
In the Linux kernel, the following vulnerability has been resolved: mtd: Fix gluebi NULL pointer dereference caused by ftl notifier If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc – NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME.
In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology() Get logical socket id instead of physical id in discover_upi_topology() to avoid out-of-bound access on ‘upi = &type->topology[nid][idx];’ line that leads to NULL pointer dereference in upi_fill_topology()
In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/memhp: Fix access beyond end of drmem array dlpar_memory_remove_by_index() may access beyond the bounds of the drmem lmb array when the LMB lookup fails to match an entry with the given DRC index. When the search fails, the cursor is left pointing to &drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the last valid entry in the array. The debug message at the end of the function then dereferences this pointer: pr_debug(“Failed to hot-remove memory at %llxn”, lmb->base_addr); This was found by inspection and confirmed with KASAN: pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234 ================================================================== BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658 Read of size 8 at addr c000000364e97fd0 by task bash/949 dump_stack_lvl+0xa4/0xfc (unreliable) print_report+0x214/0x63c kasan_report+0x140/0x2e0 __asan_load8+0xa8/0xe0 dlpar_memory+0x298/0x1658 handle_dlpar_errorlog+0x130/0x1d0 dlpar_store+0x18c/0x3e0 kobj_attr_store+0x68/0xa0 sysfs_kf_write+0xc4/0x110 kernfs_fop_write_iter+0x26c/0x390 vfs_write+0x2d4/0x4e0 ksys_write+0xac/0x1a0 system_call_exception+0x268/0x530 system_call_vectored_common+0x15c/0x2ec Allocated by task 1: kasan_save_stack+0x48/0x80 kasan_set_track+0x34/0x50 kasan_save_alloc_info+0x34/0x50 __kasan_kmalloc+0xd0/0x120 __kmalloc+0x8c/0x320 kmalloc_array.constprop.0+0x48/0x5c drmem_init+0x2a0/0x41c do_one_initcall+0xe0/0x5c0 kernel_init_freeable+0x4ec/0x5a0 kernel_init+0x30/0x1e0 ret_from_kernel_user_thread+0x14/0x1c The buggy address belongs to the object at c000000364e80000 which belongs to the cache kmalloc-128k of size 131072 The buggy address is located 0 bytes to the right of allocated 98256-byte region [c000000364e80000, c000000364e97fd0) ================================================================== pseries-hotplug-mem: Failed to hot-remove memory at 0 Log failed lookups with a separate message and dereference the cursor only when it points to a valid entry.
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix accesses to uninit stack slots Privileged programs are supposed to be able to read uninitialized stack memory (ever since 6715df8d5) but, before this patch, these accesses were permitted inconsistently. In particular, accesses were permitted above state->allocated_stack, but not below it. In other words, if the stack was already “large enough”, the access was permitted, but otherwise the access was rejected instead of being allowed to “grow the stack”. This undesired rejection was happening in two places: – in check_stack_slot_within_bounds() – in check_stack_range_initialized() This patch arranges for these accesses to be permitted. A bunch of tests that were relying on the old rejection had to change; all of them were changed to add also run unprivileged, in which case the old behavior persists. One tests couldn’t be updated – global_func16 – because it can’t run unprivileged for other reasons. This patch also fixes the tracking of the stack size for variable-offset reads. This second fix is bundled in the same commit as the first one because they’re inter-related. Before this patch, writes to the stack using registers containing a variable offset (as opposed to registers with fixed, known values) were not properly contributing to the function’s needed stack size. As a result, it was possible for a program to verify, but then to attempt to read out-of-bounds data at runtime because a too small stack had been allocated for it. Each function tracks the size of the stack it needs in bpf_subprog_info.stack_depth, which is maintained by update_stack_depth(). For regular memory accesses, check_mem_access() was calling update_state_depth() but it was passing in only the fixed part of the offset register, ignoring the variable offset. This was incorrect; the minimum possible value of that register should be used instead. This tracking is now fixed by centralizing the tracking of stack size in grow_stack_state(), and by lifting the calls to grow_stack_state() to check_stack_access_within_bounds() as suggested by Andrii. The code is now simpler and more convincingly tracks the correct maximum stack size. check_stack_range_initialized() can now rely on enough stack having been allocated for the access; this helps with the fix for the first issue. A few tests were changed to also check the stack depth computation. The one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv.
In the Linux kernel, the following vulnerability has been resolved: hisi_acc_vfio_pci: Update migration data pointer correctly on saving/resume When the optional PRE_COPY support was added to speed up the device compatibility check, it failed to update the saving/resuming data pointers based on the fd offset. This results in migration data corruption and when the device gets started on the destination the following error is reported in some cases, [ 478.907684] arm-smmu-v3 arm-smmu-v3.2.auto: event 0x10 received: [ 478.913691] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000310200000010 [ 478.919603] arm-smmu-v3 arm-smmu-v3.2.auto: 0x000002088000007f [ 478.925515] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 [ 478.931425] arm-smmu-v3 arm-smmu-v3.2.auto: 0x0000000000000000 [ 478.947552] hisi_zip 0000:31:00.0: qm_axi_rresp [error status=0x1] found [ 478.955930] hisi_zip 0000:31:00.0: qm_db_timeout [error status=0x400] found [ 478.955944] hisi_zip 0000:31:00.0: qm sq doorbell timeout in function 2
In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length If the host sends an H2CData command with an invalid DATAL, the kernel may crash in nvmet_tcp_build_pdu_iovec(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 lr : nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp] Call trace: process_one_work+0x174/0x3c8 worker_thread+0x2d0/0x3e8 kthread+0x104/0x110 Fix the bug by raising a fatal error if DATAL isn’t coherent with the packet size. Also, the PDU length should never exceed the MAXH2CDATA parameter which has been communicated to the host in nvmet_tcp_handle_icreq().
In the Linux kernel, the following vulnerability has been resolved: iommu: Don’t reserve 0-length IOVA region When the bootloader/firmware doesn’t setup the framebuffers, their address and size are 0 in “iommu-addresses” property. If IOVA region is reserved with 0 length, then it ends up corrupting the IOVA rbtree with an entry which has pfn_hi < pfn_lo. If we intend to use display driver in kernel without framebuffer then it’s causing the display IOMMU mappings to fail as entire valid IOVA space is reserved when address and length are passed as 0. An ideal solution would be firmware removing the “iommu-addresses” property and corresponding “memory-region” if display is not present. But the kernel should be able to handle this by checking for size of IOVA region and skipping the IOVA reservation if size is 0. Also, add a warning if firmware is requesting 0-length IOVA region reservation.
In the Linux kernel, the following vulnerability has been resolved: serial: imx: fix tx statemachine deadlock When using the serial port as RS485 port, the tx statemachine is used to control the RTS pin to drive the RS485 transceiver TX_EN pin. When the TTY port is closed in the middle of a transmission (for instance during userland application crash), imx_uart_shutdown disables the interface and disables the Transmission Complete interrupt. afer that, imx_uart_stop_tx bails on an incomplete transmission, to be retriggered by the TC interrupt. This interrupt is disabled and therefore the tx statemachine never transitions out of SEND. The statemachine is in deadlock now, and the TX_EN remains low, making the interface useless. imx_uart_stop_tx now checks for incomplete transmission AND whether TC interrupts are enabled before bailing to be retriggered. This makes sure the state machine handling is reached, and is properly set to WAIT_AFTER_SEND.
In the Linux kernel, the following vulnerability has been resolved: serial: 8250: omap: Don’t skip resource freeing if pm_runtime_resume_and_get() failed Returning an error code from .remove() makes the driver core emit the little helpful error message: remove callback returned a non-zero value. This will be ignored. and then remove the device anyhow. So all resources that were not freed are leaked in this case. Skipping serial8250_unregister_port() has the potential to keep enough of the UART around to trigger a use-after-free. So replace the error return (and with it the little helpful error message) by a more useful error message and continue to cleanup.
In the Linux kernel, the following vulnerability has been resolved: block: add check that partition length needs to be aligned with block size Before calling add partition or resize partition, there is no check on whether the length is aligned with the logical block size. If the logical block size of the disk is larger than 512 bytes, then the partition size maybe not the multiple of the logical block size, and when the last sector is read, bio_truncate() will adjust the bio size, resulting in an IO error if the size of the read command is smaller than the logical block size.If integrity data is supported, this will also result in a null pointer dereference when calling bio_integrity_free.
In the Linux kernel, the following vulnerability has been resolved: media: v4l: async: Fix duplicated list deletion The list deletion call dropped here is already called from the helper function in the line before. Having a second list_del() call results in either a warning (with CONFIG_DEBUG_LIST=y): list_del corruption, c46c8198->next is LIST_POISON1 (00000100) If CONFIG_DEBUG_LIST is disabled the operation results in a kernel error due to NULL pointer dereference.
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference at hibernate During hibernate sequence the source context might not have a clk_mgr. So don’t use it to look for DML2 support.
In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix bounds limiting when given a malformed entity If we’re given a malformed entity in drm_sched_entity_init()–shouldn’t happen, but we verify–with out-of-bounds priority value, we set it to an allowed value. Fix the expression which sets this limit.
In the Linux kernel, the following vulnerability has been resolved: bpf: fix check for attempt to corrupt spilled pointer When register is spilled onto a stack as a 1/2/4-byte register, we set slot_type[BPF_REG_SIZE – 1] (plus potentially few more below it, depending on actual spill size). So to check if some stack slot has spilled register we need to consult slot_type[7], not slot_type[0]. To avoid the need to remember and double-check this in the future, just use is_spilled_reg() helper.
In the Linux kernel, the following vulnerability has been resolved: EDAC/thunderx: Fix possible out-of-bounds string access Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function ‘thunderx_ocx_com_threaded_isr’: drivers/edac/thunderx_edac.c:1136:17: error: ‘strncat’ specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ … 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); … 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); … Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ]
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: skip end interval element from gc rbtree lazy gc on insert might collect an end interval element that has been just added in this transactions, skip end interval elements that are not yet active.
In the Linux kernel, the following vulnerability has been resolved: net: tls: fix use-after-free with partial reads and async decrypt tls_decrypt_sg doesn’t take a reference on the pages from clear_skb, so the put_page() in tls_decrypt_done releases them, and we trigger a use-after-free in process_rx_list when we try to read from the partially-read skb.
In the Linux kernel, the following vulnerability has been resolved: tls: fix race between async notify and socket close The submitting thread (one which called recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete() so any code past that point risks touching already freed data. Try to avoid the locking and extra flags altogether. Have the main thread hold an extra reference, this way we can depend solely on the atomic ref counter for synchronization. Don’t futz with reiniting the completion, either, we are now tightly controlling when completion fires.
In the Linux kernel, the following vulnerability has been resolved: net: tls: handle backlogging of crypto requests Since we’re setting the CRYPTO_TFM_REQ_MAY_BACKLOG flag on our requests to the crypto API, crypto_aead_{encrypt,decrypt} can return -EBUSY instead of -EINPROGRESS in valid situations. For example, when the cryptd queue for AESNI is full (easy to trigger with an artificially low cryptd.cryptd_max_cpu_qlen), requests will be enqueued to the backlog but still processed. In that case, the async callback will also be called twice: first with err == -EINPROGRESS, which it seems we can just ignore, then with err == 0. Compared to Sabrina’s original patch this version uses the new tls_*crypt_async_wait() helpers and converts the EBUSY to EINPROGRESS to avoid having to modify all the error handling paths. The handling is identical.
In the Linux kernel, the following vulnerability has been resolved: tls: fix race between tx work scheduling and socket close Similarly to previous commit, the submitting thread (recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete(). Reorder scheduling the work before calling complete(). This seems more logical in the first place, as it’s the inverse order of what the submitting thread will do.
In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix stack corruption When tc filters are first added to a net device, the corresponding local port gets bound to an ACL group in the device. The group contains a list of ACLs. In turn, each ACL points to a different TCAM region where the filters are stored. During forwarding, the ACLs are sequentially evaluated until a match is found. One reason to place filters in different regions is when they are added with decreasing priorities and in an alternating order so that two consecutive filters can never fit in the same region because of their key usage. In Spectrum-2 and newer ASICs the firmware started to report that the maximum number of ACLs in a group is more than 16, but the layout of the register that configures ACL groups (PAGT) was not updated to account for that. It is therefore possible to hit stack corruption [1] in the rare case where more than 16 ACLs in a group are required. Fix by limiting the maximum ACL group size to the minimum between what the firmware reports and the maximum ACLs that fit in the PAGT register. Add a test case to make sure the machine does not crash when this condition is hit. [1] Kernel panic – not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120 […] dump_stack_lvl+0x36/0x50 panic+0x305/0x330 __stack_chk_fail+0x15/0x20 mlxsw_sp_acl_tcam_group_update+0x116/0x120 mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110 mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b
In the Linux kernel, the following vulnerability has been resolved: net: netdevsim: don’t try to destroy PHC on VFs PHC gets initialized in nsim_init_netdevsim(), which is only called if (nsim_dev_port_is_pf()). Create a counterpart of nsim_init_netdevsim() and move the mock_phc_destroy() there. This fixes a crash trying to destroy netdevsim with VFs instantiated, as caught by running the devlink.sh test: BUG: kernel NULL pointer dereference, address: 00000000000000b8 RIP: 0010:mock_phc_destroy+0xd/0x30 Call Trace: <TASK> nsim_destroy+0x4a/0x70 [netdevsim] __nsim_dev_port_del+0x47/0x70 [netdevsim] nsim_dev_reload_destroy+0x105/0x120 [netdevsim] nsim_drv_remove+0x2f/0xb0 [netdevsim] device_release_driver_internal+0x1a1/0x210 bus_remove_device+0xd5/0x120 device_del+0x159/0x490 device_unregister+0x12/0x30 del_device_store+0x11a/0x1a0 [netdevsim] kernfs_fop_write_iter+0x130/0x1d0 vfs_write+0x30b/0x4b0 ksys_write+0x69/0xf0 do_syscall_64+0xcc/0x1e0 entry_SYSCALL_64_after_hwframe+0x6f/0x77
In the Linux kernel, the following vulnerability has been resolved: erofs: fix inconsistent per-file compression format EROFS can select compression algorithms on a per-file basis, and each per-file compression algorithm needs to be marked in the on-disk superblock for initialization. However, syzkaller can generate inconsistent crafted images that use an unsupported algorithmtype for specific inodes, e.g. use MicroLZMA algorithmtype even it’s not set in `sbi->available_compr_algs`. This can lead to an unexpected “BUG: kernel NULL pointer dereference” if the corresponding decompressor isn’t built-in. Fix this by checking against `sbi->available_compr_algs` for each m_algorithmformat request. Incorrect !erofs_sb_has_compr_cfgs preset bitmap is now fixed together since it was harmless previously.
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix re-attachment branch in bpf_tracing_prog_attach The following case can cause a crash due to missing attach_btf: 1) load rawtp program 2) load fentry program with rawtp as target_fd 3) create tracing link for fentry program with target_fd = 0 4) repeat 3 In the end we have: – prog->aux->dst_trampoline == NULL – tgt_prog == NULL (because we did not provide target_fd to link_create) – prog->aux->attach_btf == NULL (the program was loaded with attach_prog_fd=X) – the program was loaded for tgt_prog but we have no way to find out which one BUG: kernel NULL pointer dereference, address: 0000000000000058 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15b/0x430 ? fixup_exception+0x22/0x330 ? exc_page_fault+0x6f/0x170 ? asm_exc_page_fault+0x22/0x30 ? bpf_tracing_prog_attach+0x279/0x560 ? btf_obj_id+0x5/0x10 bpf_tracing_prog_attach+0x439/0x560 __sys_bpf+0x1cf4/0x2de0 __x64_sys_bpf+0x1c/0x30 do_syscall_64+0x41/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Return -EINVAL in this situation.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix UAF issue in ksmbd_tcp_new_connection() The race is between the handling of a new TCP connection and its disconnection. It leads to UAF on `struct tcp_transport` in ksmbd_tcp_new_connection() function.
In the Linux kernel, the following vulnerability has been resolved: i2c: i801: Fix block process call transactions According to the Intel datasheets, software must reset the block buffer index twice for block process call transactions: once before writing the outgoing data to the buffer, and once again before reading the incoming data from the buffer. The driver is currently missing the second reset, causing the wrong portion of the block buffer to be read.
In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate mech token in session setup If client send invalid mech token in session setup request, ksmbd validate and make the error if it is invalid.
In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix NULL pointer dereference in error path When calling mlxsw_sp_acl_tcam_region_destroy() from an error path after failing to attach the region to an ACL group, we hit a NULL pointer dereference upon ‘region->group->tcam’ [1]. Fix by retrieving the ‘tcam’ pointer using mlxsw_sp_acl_to_tcam(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 […] RIP: 0010:mlxsw_sp_acl_tcam_region_destroy+0xa0/0xd0 […] Call Trace: mlxsw_sp_acl_tcam_vchunk_get+0x88b/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b
In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix netdev_priv() dereference before check on non-DSA netdevice events After the blamed commit, we started doing this dereference for every NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system. static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev) { struct dsa_user_priv *p = netdev_priv(dev); return p->dp; } Which is obviously bogus, because not all net_devices have a netdev_priv() of type struct dsa_user_priv. But struct dsa_user_priv is fairly small, and p->dp means dereferencing 8 bytes starting with offset 16. Most drivers allocate that much private memory anyway, making our access not fault, and we discard the bogus data quickly afterwards, so this wasn’t caught. But the dummy interface is somewhat special in that it calls alloc_netdev() with a priv size of 0. So every netdev_priv() dereference is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event with a VLAN as its new upper: $ ip link add dummy1 type dummy $ ip link add link dummy1 name dummy1.100 type vlan id 100 [ 43.309174] ================================================================== [ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8 [ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374 [ 43.330058] [ 43.342436] Call trace: [ 43.366542] dsa_user_prechangeupper+0x30/0xe8 [ 43.371024] dsa_user_netdevice_event+0xb38/0xee8 [ 43.375768] notifier_call_chain+0xa4/0x210 [ 43.379985] raw_notifier_call_chain+0x24/0x38 [ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8 [ 43.389120] netdev_upper_dev_link+0x70/0xa8 [ 43.393424] register_vlan_dev+0x1bc/0x310 [ 43.397554] vlan_newlink+0x210/0x248 [ 43.401247] rtnl_newlink+0x9fc/0xe30 [ 43.404942] rtnetlink_rcv_msg+0x378/0x580 Avoid the kernel oops by dereferencing after the type check, as customary.
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache There is a potential UAF scenario in the case of an LPI translation cache hit racing with an operation that invalidates the cache, such as a DISCARD ITS command. The root of the problem is that vgic_its_check_cache() does not elevate the refcount on the vgic_irq before dropping the lock that serializes refcount changes. Have vgic_its_check_cache() raise the refcount on the returned vgic_irq and add the corresponding decrement after queueing the interrupt.
In the Linux kernel, the following vulnerability has been resolved: pwm: Fix out-of-bounds access in of_pwm_single_xlate() With args->args_count == 2 args->args[2] is not defined. Actually the flags are contained in args->args[1].
An issue was discovered in LIVEBOX Collaboration vDesk through v031. A URL Redirection to an Untrusted Site (Open Redirect) can occur under the /api/v1/notification/createnotification endpoint, allowing an authenticated user to send an arbitrary push notification to any other user of the system. This push notification can include an (invisible) clickable link.
An issue was discovered in LIVEBOX Collaboration vDesk through v031. An Observable Response Discrepancy can occur under the /api/v1/vdeskintegration/user/isenableuser endpoint, the /api/v1/sharedsearch?search={NAME]+{SURNAME] endpoint, and the /login endpoint. The web application provides different responses to incoming requests in a way that reveals internal state information to an unauthorized actor outside of the intended control sphere.
An issue was discovered in LIVEBOX Collaboration vDesk through v031. A basic XSS vulnerability exists under the /api/v1/vdeskintegration/todo/createorupdate endpoint via the title parameter and /dashboard/reminders. A remote user (authenticated to the product) can store arbitrary HTML code in the reminder section title in order to corrupt the web page (for example, by creating phishing sections to exfiltrate victims’ credentials).
Wallos 0.9 is vulnerable to Cross Site Scripting (XSS) in all text-based input fields without proper validation, excluding those requiring specific formats like date fields.
When storing and re-accessing data on a networking channel, the length of buffers may have been confused, resulting in an out-of-bounds memory read. This vulnerability affects Firefox < 123, Firefox ESR < 115.8, and Thunderbird < 115.8.
Through a series of API calls and redirects, an attacker-controlled alert dialog could have been displayed on another website (with the victim website’s URL shown). This vulnerability affects Firefox < 123, Firefox ESR < 115.8, and Thunderbird < 115.8.
A website could have obscured the fullscreen notification by using a dropdown select input element. This could have led to user confusion and possible spoofing attacks. This vulnerability affects Firefox < 123, Firefox ESR < 115.8, and Thunderbird < 115.8.
If a website set a large custom cursor, portions of the cursor could have overlapped with the permission dialog, potentially resulting in user confusion and unexpected granted permissions. This vulnerability affects Firefox < 123, Firefox ESR < 115.8, and Thunderbird < 115.8.
A malicious website could have used a combination of exiting fullscreen mode and `requestPointerLock` to cause the user’s mouse to be re-positioned unexpectedly, which could have led to user confusion and inadvertently granting permissions they did not intend to grant. This vulnerability affects Firefox < 123, Firefox ESR < 115.8, and Thunderbird < 115.8.
Set-Cookie response headers were being incorrectly honored in multipart HTTP responses. If an attacker could control the Content-Type response header, as well as control part of the response body, they could inject Set-Cookie response headers that would have been honored by the browser. This vulnerability affects Firefox < 123, Firefox ESR < 115.8, and Thunderbird < 115.8.
Incorrect code generation could have led to unexpected numeric conversions and potential undefined behavior.*Note:* This issue only affects 32-bit ARM devices. This vulnerability affects Firefox < 123, Firefox ESR < 115.8, and Thunderbird < 115.8.
Memory safety bugs present in Firefox 122, Firefox ESR 115.7, and Thunderbird 115.7. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 123, Firefox ESR < 115.8, and Thunderbird < 115.8.
The `fetch()` API and navigation incorrectly shared the same cache, as the cache key did not include the optional headers `fetch()` may contain. Under the correct circumstances, an attacker may have been able to poison the local browser cache by priming it with a `fetch()` response controlled by the additional headers. Upon navigation to the same URL, the user would see the cached response instead of the expected response. This vulnerability affects Firefox < 123.
When opening a website using the `firefox://` protocol handler, SameSite cookies were not properly respected. This vulnerability affects Firefox < 123.
The incorrect object was checked for NULL in the built-in profiler, potentially leading to invalid memory access and undefined behavior. *Note:* This issue only affects the application when the profiler is running. This vulnerability affects Firefox < 123.
Memory safety bugs present in Firefox 122. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 123.
Upon scanning a JavaScript URI with the QR code scanner, an attacker could have executed unauthorized scripts on the current top origin sites in the URL bar. This vulnerability affects Firefox for iOS < 123.
Using an AMP url with a canonical element, an attacker could have executed JavaScript from an opened bookmarked page. This vulnerability affects Firefox for iOS < 123.
An attacker could have executed unauthorized scripts on top origin sites using a JavaScript URI when opening an external URL with a custom Firefox scheme. This vulnerability affects Firefox for iOS < 123.
An attacker could have executed unauthorized scripts on top origin sites using a JavaScript URI when opening an external URL with a custom Firefox scheme and a timeout race condition. This vulnerability affects Focus for iOS < 122.
Utilizing a 302 redirect, an attacker could have conducted a Universal Cross-Site Scripting (UXSS) on a victim website, if the victim had a link to the attacker’s website. This vulnerability affects Focus for iOS < 123.
Buffer Overflow vulnerability in mz-automation.de libiec61859 v.1.4.0 allows a remote attacker to cause a denial of service via the mmsServer_handleGetNameListRequest function to the mms_getnamelist_service component.
The Node.js Permission Model does not clarify in the documentation that wildcards should be only used as the last character of a file path. For example: “` –allow-fs-read=/home/node/.ssh/*.pub “` will ignore `pub` and give access to everything after `.ssh/`. This misleading documentation affects all users using the experimental permission model in Node.js 20 and Node.js 21. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.
Node.js depends on multiple built-in utility functions to normalize paths provided to node:fs functions, which can be overwitten with user-defined implementations leading to filesystem permission model bypass through path traversal attack. This vulnerability affects all users using the experimental permission model in Node.js 20 and Node.js 21. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.
On Linux, Node.js ignores certain environment variables if those may have been set by an unprivileged user while the process is running with elevated privileges with the only exception of CAP_NET_BIND_SERVICE. Due to a bug in the implementation of this exception, Node.js incorrectly applies this exception even when certain other capabilities have been set. This allows unprivileged users to inject code that inherits the process’s elevated privileges.
The permission model protects itself against path traversal attacks by calling path.resolve() on any paths given by the user. If the path is to be treated as a Buffer, the implementation uses Buffer.from() to obtain a Buffer from the result of path.resolve(). By monkey-patching Buffer internals, namely, Buffer.prototype.utf8Write, the application can modify the result of path.resolve(), which leads to a path traversal vulnerability. This vulnerability affects all users using the experimental permission model in Node.js 20 and Node.js 21. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js.
A vulnerability in Node.js HTTP servers allows an attacker to send a specially crafted HTTP request with chunked encoding, leading to resource exhaustion and denial of service (DoS). The server reads an unbounded number of bytes from a single connection, exploiting the lack of limitations on chunk extension bytes. The issue can cause CPU and network bandwidth exhaustion, bypassing standard safeguards like timeouts and body size limits.
An arbitrary file upload vulnerability in the component /sysFile/upload of Novel-Plus v4.3.0-RC1 allows attackers to execute arbitrary code via uploading a crafted file.
The OpenVPN GUI installer before version 2.6.9 did not set the proper access control restrictions to the installation directory of OpenVPN binaries when using a non-standard installation path, which allows an attacker to replace binaries to run arbitrary executables.
The nodejs framework in OpenVPN Connect 3.0 through 3.4.3 (Windows)/3.4.7 (macOS) was not properly configured, which allows a local user to execute arbitrary code within the nodejs process context via the ELECTRON_RUN_AS_NODE environment variable
SQL Injection vulnerability in PMB Services PMB v.7.4.7 and before allows a remote unauthenticated attacker to execute arbitrary code via the query parameter in the /admin/convert/export_z3950.php endpoint.
SQL injection vulnerability in PMB v.7.4.7 and earlier allows a remote attacker to execute arbitrary code via the thesaurus parameter in export_skos.php.
A SQL Injection vulnerability in /admin/convert/export.class.php in PMB 7.4.7 and earlier versions allows remote unauthenticated attackers to execute arbitrary SQL commands via the query parameter in get_next_notice function.
A SQL Injection vulnerability in /pmb/opac_css/includes/sessions.inc.php in PMB 7.4.7 and earlier allows remote unauthenticated attackers to inject arbitrary SQL commands via the PmbOpac-LOGIN cookie value.
A SQL Injection vulnerability in /admin/sauvegarde/run.php in PMB 7.4.7 and earlier allows remote authenticated attackers to execute arbitrary SQL commands via the sauvegardes variable through the /admin/sauvegarde/run.php endpoint.
In the module “Survey TMA” (ecomiz_survey_tma) up to version 2.0.0 from Ecomiz for PrestaShop, a guest can download personal information without restriction.
In the module “Generate barcode on invoice / delivery slip” (ecgeneratebarcode) from Ether Creation <= 1.2.0 for PrestaShop, a guest can perform SQL injection.
Cross Site Scripting (XSS) vulnerability in ProjeQtOr 11.0.2 allows a remote attacker to execute arbitrary code via a crafted script to thecheckvalidHtmlText function in the ack.php and security.php files.
QEMU before 8.2.0 has an integer underflow, and resultant buffer overflow, via a TI command when an expected non-DMA transfer length is less than the length of the available FIFO data. This occurs in esp_do_nodma in hw/scsi/esp.c because of an underflow of async_len.
An issue was discovered in QEMU 7.1.0 through 8.2.1. register_vfs in hw/pci/pcie_sriov.c mishandles the situation where a guest writes NumVFs greater than TotalVFs, leading to a buffer overflow in VF implementations.
An issue was discovered in QEMU 7.1.0 through 8.2.1. register_vfs in hw/pci/pcie_sriov.c does not set NumVFs to PCI_SRIOV_TOTAL_VF, and thus interaction with hw/nvme/ctrl.c is mishandled.
Directory Traversal vulnerability in React Native Document Picker before v.9.1.1 and fixed in v.9.1.1 allows a local attacker to execute arbitrary code via a crafted script to the Android library component.
Open Robotics Robotic Operating Sytstem 2 (ROS2) and Nav2 humble versions were discovered to contain a buffer overflow via the nav2_controller process. This vulnerability is triggerd via sending a crafted .yaml file.
Open Robotics Robotic Operating Sytstem 2 (ROS2) and Nav2 humble versions were discovered to contain a NULL pointer dereference via the isCurrent() function at /src/layered_costmap.cpp.
Inappropriate pointer order of laser_scan_filter_.reset() and tf_listener_.reset() (amcl_node.cpp) in Open Robotics Robotic Operating Sytstem 2 (ROS2) and Nav2 humble versions leads to a use-after-free.
Inappropriate pointer order of map_sub_ and map_free(map_) (amcl_node.cpp) in Open Robotics Robotic Operating Sytstem 2 (ROS2) and Nav2 humble versions leads to a use-after-free.
SKINsoft S-Museum 7.02.3 allows XSS via the filename of an uploaded file. Unlike in CVE-2024-25802, the attack payload is in the name (not the content) of a file.
The TD Bank TD Advanced Dashboard client through 3.0.3 for macOS allows arbitrary code execution because of the lack of electron::fuses::IsRunAsNodeEnabled (i.e., ELECTRON_RUN_AS_NODE can be used in production). This makes it easier for a compromised process to access banking information.
Teltonika RUT240 devices with firmware before 07.04.2, when bridge mode is used, sometimes make SSH and HTTP services available on the IPv6 WAN interface even though the UI shows that they are only available on the LAN interface.
A stack overflow vulnerability in Tenda AC21 with firmware version US_AC21V1.0re_V16.03.08.15_cn_TDC01 allows attackers to run arbitrary commands via crafted POST request to /goform/openSchedWifi.
A stack overflow vulnerability in Tenda AC23 with firmware version US_AC23V1.0re_V16.03.07.45_cn_TDC01 allows attackers to run arbitrary commands via schedStartTime parameter.
A stack overflow vulnerability in Tenda AC6 with firmware version US_AC6V5.0re_V03.03.02.01_cn_TDC01 allows attackers to run arbitrary commands via crafted POST request to /goform/PowerSaveSet.
Stack Based Buffer Overflow vulnerability in Tenda AC9 v.3.0 with firmware version v.15.03.06.42_multi allows a remote attacker to execute arbitrary code via the add_white_node function.
A Stack Based Buffer Overflow vulnerability in tenda AC9 AC9 v.3.0 with firmware version v.15.03.06.42_multi allows a remote attacker to execute arbitrary code via the fromSetIpMacBind function.
Stack Based Buffer Overflow vulnerability in Tenda AC9 v.3.0 with firmware version v.15.03.06.42_multi allows a remote attacker to execute arbitrary code via the formSetDeviceName function.
A Stack Based Buffer Overflow vulnerability in Tenda AC9 v.3.0 with firmware version v.15.03.06.42_multi allows a remote attacker to execute arbitrary code via the formWifiBasicSet function.
An access control issue in /usr/sbin/httpd in Tenda TX9 V1 V22.03.02.54, Tenda AX3 V3 V16.03.12.11, Tenda AX9 V1 V22.03.01.46, and Tenda AX12 V1 V22.03.01.46 allows attackers to bypass authentication on any endpoint via a crafted URL.
An issue was discovered in Terminalfour 7.4 through 7.4.0004 QP3 and 8 through 8.3.19, and Formbank through 2.1.10-FINAL. Unauthenticated Stored Cross-Site Scripting can occur, with resultant Admin Session Hijacking. The attack vectors are Form Builder and Form Preview.
Directory Traversal vulnerability in Terrasoft, Creatio Terrasoft CRM v.7.18.4.1532 allows a remote attacker to obtain sensitive information via a crafted request to the terrasoft.axd component.
An issue in TOTOLINK X5000R V.9.1.0u.6369_B20230113 allows a remote attacker to cause a denial of service via the host_time parameter of the NTPSyncWithHost component.
A malformed discovery packet sent by a malicious actor with preexisting access to the network could interrupt the functionality of device management and discovery. Affected Products: UniFi Access Points UniFi Switches UniFi LTE Backup UniFi Express (Only Mesh Mode, Router mode is not affected) Mitigation: Update UniFi Access Points to Version 6.6.65 or later. Update UniFi Switches to Version 6.6.61 or later. Update UniFi LTE Backup to Version 6.6.57 or later. Update UniFi Express to Version 3.2.5 or later.
The SocialDriver WordPress theme before version 2024 has a prototype pollution vulnerability that could allow an attacker to inject arbitrary properties resulting in a cross-site scripting (XSS) attack.
A buffer overflow in Wireshark before 4.2.0 allows a remote attacker to cause a denial of service via the pan/addr_resolv.c, and ws_manuf_lookup_str(), size components. NOTE: this is disputed by the vendor because neither release 4.2.0 nor any other release was affected.
An issue in Wireshark before 4.2.0 allows a remote attacker to cause a denial of service via the packet-bgp.c, dissect_bgp_open(tvbuff_t*tvb, proto_tree*tree, packet_info*pinfo), optlen components. NOTE: this is disputed by the vendor because neither release 4.2.0 nor any other release was affected.
A Buffer Overflow in Wireshark before 4.2.0 allows a remote attacker to cause a denial of service via the wsutil/to_str.c, and format_fractional_part_nsecs components. NOTE: this is disputed by the vendor because neither release 4.2.0 nor any other release was affected.
Insecure AES key in Yealink Configuration Encrypt Tool below verrsion 1.2. A single, vendorwide, hardcoded AES key in the configuration tool used to encrypt provisioning documents was leaked leading to a compromise of confidentiality of provisioning documents.
Directory Traversal vulnerability in YetiForceCompany YetiForceCRM versions 6.4.0 and before allows a remote authenticated attacker to obtain sensitive information via the license parameter in the LibraryLicense.php component.
